|
No.3286 Gongnong Street,
Changchun,
China |
0086-431-85694042
........
0086-431-85680541 |
0086-431-85683672 |
130021 |
|
|
|
| Medium Voltage Accessories |
| |
| |
| 10/20kV heat
shrinkable terminations |
| |
10/20kV
heat shrinkable terminations for indoor and outdoor
applications for XLPE and paper insulated power cables
up to 35 kV
Features:
- Unique stress control system: High permittivity
material
- Compact design, Few components
- Simple to install, Minimal waste for disposal
- Fast, consistent installation means lower installed
costs
- Installation environment: use of torch adds flexibility
to cable preparation in any climate
- High reliability
- Heat-activated seals ensure maximum protection against
moisture ingress
- Lightweight construction requires no additional
support
- UV resistant, non-tracking outer tube for long life,
even under adverse conditions
- Mechanical robustness
- Meet: GB/T 12706 Standard
|
| |
 |
- Shed
- Conductive Breakout
- Stress control tubing
- Phase color tube
- Sealing tubing
- trifurcating
- Insulation tubing
- Voil filler
- Lug sealing tubing
|
| |
|
|
- Ground braid: Provides shield continuity
- Void filler: Moisture sealing, Non-tracking,
high voltage filler
- Provides a watertight connector seal when
combined with heat shrinkable material.
- Will not harden or crack.
- Roll spring: Has a constant-force roll spring,
which provides secure grounding without soldering.
- Non-tracking, heat shrinkable outer insulation
Sleeve:
- Provides excellent UV stability
- Withstands polluted environments.
- Is proven to withstand severe applications.
- Heat shrinkable stress control tubing:
- Reduces the electrical stress gradient at
the end of the cable shield to safe operating
levels.
- Shrinks to fit out-of-spec cable.
- Provides long-term electrical performance.
- Heat shrinkable Rain Skirts:
- Increase surface creepage distance.
- Easily adapt terminations for outdoor use.
- Sealing tubing
- Lug sealing tubing
- Cable lug
|
|
| |
Technical Data
| Item No. |
Property |
Test condition and Requirement |
Results |
1 |
AC withstand for 1 min.(dry withstand, for indoor
termination) |
No breakdown and flashover shall occur at 45kV,
1min |
No breakdown and flashover occurred on the combi.sample
at 45kV, 1min |
2 |
AC withstand for 1 min.(wet withstand, for outdoor
termination) |
No breakdown and flashover shall occur at 45kV,
1min |
No breakdown and flashover occurred on the combi.sample
at 45kV, 1min |
3 |
Partial discharge |
13kV, ¡Ü20PC |
13kV, ¡Ü20PC |
4 |
Load cycle |
Heating for 5h, cooling for 3h. Conductor's temperature
is 95¡æ, 3 cycles |
Conductor's temperature is 95¡æ. Results refer
to the following test |
5 |
Impulse voltage withstand 1.2/50us¡À10times |
10 positiVe and 10 negative impulses at 105kV,
flashover 1 time is allowed but not including total
testing times |
No breakdown of the combi.sample occurred at 105kV |
6 |
DC voltage withstand negative 15 min. |
No breakdown and flashover shall occur at 52kV |
No breakdown and flashover occurred on the combi.sample
at 52kV, 15min |
7 |
AC voltage withstand, 4h |
No breakdown and flashover shall occur at 35kV,
4h |
No breakdown and flashover occurred on the combi.sample
at 35kV, 4h |
8 |
Oil-seal up test
(Only for Paper insulated cables) |
Heating for 24h, cooling for 24h. Conductor's
temperature is 65¡æ, oil pressure: 100MPA |
No leaking, no seeping |
|
Dimensions
| Spec. |
Description |
Application
Indoor/Outdoor |
Single Core/ 3-Core |
Conductor
Cross Section(mm2) |
| NSY-35/1x1 |
10/20kV heat
shrinkable terminations for indoor applications
for XLPE power cables up to 35 kV |
Indoor |
Single Core |
25~50 |
| NSY-35/1x2 |
Indoor |
Single Core |
70~120 |
| NSY-35/1x3 |
Indoor |
Single Core |
150~240 |
| NSY-35/1x4 |
Indoor |
Single Core |
300~400 |
| NSY-35/3x1 |
Indoor |
3-Core |
25~50 |
| NSY-35/3x2 |
Indoor |
3-Core |
70~120 |
| NSY-35/3x3 |
Indoor |
3-Core |
150~240 |
| NSY-35/3x4 |
Indoor |
3-Core |
300~400 |
| WSY-35/1x1 |
10/20kV heat
shrinkable terminations for Outdoor applications
for XLPE power cables up to 35 kV |
Outdoor |
Single Core |
25~50 |
| WSY-35/1x2 |
Outdoor |
Single Core |
70~120 |
| WSY-35/1x3 |
Outdoor |
Single Core |
150~240 |
| WSY-35/1x4 |
Outdoor |
Single Core |
300~400 |
| WSY-35/3x1 |
Outdoor |
3-Core |
25~50 |
| WSY-35/3x2 |
Outdoor |
3-Core |
70~120 |
| WSY-35/3x3 |
Outdoor |
3-Core |
150~240 |
| WSY-35/3x4 |
Outdoor |
3-Core |
300~400 |
| NSZ-35/1x1 |
10/20kV heat
shrinkable terminations for indoor applications
for paper insulated power cables up to 35 kV |
Indoor |
Single Core |
25~50 |
| NSZ-35/1x2 |
Indoor |
Single Core |
70~120 |
| NSZ-35/1x3 |
Indoor |
Single Core |
150~240 |
| NSZ-35/1x4 |
Indoor |
Single Core |
300~400 |
| NSZ-35/3x1 |
Indoor |
3-Core |
25~50 |
| NSZ-35/3x2 |
Indoor |
3-Core |
70~120 |
| NSZ-35/3x3 |
Indoor |
3-Core |
150~240 |
| NSZ-35/3x4 |
Indoor |
3-Core |
300~400 |
| WSZ-35/1x1 |
10/20kV heat
shrinkable terminations for Outdoor applications
for paper insulated power cables up to 35 kV |
Outdoor |
Single Core |
25~50 |
| WSZ-35/1x2 |
Outdoor |
Single Core |
70~120 |
| WSZ-35/1x3 |
Outdoor |
Single Core |
150~240 |
| WSZ-35/1x4 |
Outdoor |
Single Core |
300~400 |
| WSZ-35/3x1 |
Outdoor |
3-Core |
25~50 |
| WSZ-35/3x2 |
Outdoor |
3-Core |
70~120 |
| WSZ-35/3x3 |
Outdoor |
3-Core |
150~240 |
| WSZ-35/3x4 |
Outdoor |
3-Core |
300~400 |
|
| |
|
|
|
